As a home owner you will often times need to know how to find the studs are located in your walls. Generally studs are spaced sixteen to twenty-four inches away from each other.
There are a few different methods to locating your studs. The most accurate way is with a battery operated stud finder. First make sure your stud finder is calibrated. Hold down the calibration button while sliding it along the wall until the lights are green and it quits beeping. Slowly slide it along the wall, when it starts to beep it is the beginning of the stud and when it stops you have crossed over. You should slide this over the area a couple of times until you locate the center of the stud and then mark it.
Another way is to place a flashlight on its side against the wall. Look for where the light changes or you see a slight difference in the wall texture. This indicates where the drywall seams are screwed into the studs. You can follow that seam down the wall and the line should be consistently there and may run into the baseboard. You can check this by the nails in the baseboards that they may have been filled in with wood filler.
If you do not have either tool you can knock on the wall. It will have a hollow tone. As you knock over a stud, the sound will become denser.